- Introduction: need to keep tires at the correct PSI for safety
- What is PSI?: pressure per square inch
- Why does tire pressure matter?: effects on traction, fuel economy, and handling
- Checking your PSI: how and when
- Maintaining the correct PSI: add air when needed
- Easy options to watch your Tire PSI: Smart Tire Pressure monitoring systems
- Conclusion: the importance of monitoring tires
Introduction: need to keep tires at the correct PSI for safety
One of the most important parts of keeping your car in good shape is maintaining the correct tire pressure. This can be for several reasons, the most important being safety.
If your tires are under-inflated, they can overheat and fail. This is especially dangerous at high speeds. Even if you’re just driving around town, an under-inflated tire can cause problems. It will wear out more quickly and won’t provide as much traction, which can lead to skidding or sliding on wet or icy roads.
It’s therefore important to check your tire pressure regularly and keep them inflated to the correct level. Most carmakers recommend checking at least once a month, and many new cars have tire pressure sensors that will warn you when the pressure gets too low. And as always, if you like our site make sure you come back for more car tips to keep you safe and speedy at TunedTech!
What is PSI?: pressure per square inch
Your car’s tire pressure is measured in PSI, or pounds per square inch. That’s the amount of air pressure inside the tire, and it’s important to keep an eye on it.
If your tires are underinflated, they can overheat and fail. That’s why it’s important to check your PSI regularly and inflate your tires to the manufacturer’s recommended pressure.
Most passenger cars have a recommended PSI of between 30 and 35. You can find this information in your owner’s manual or on a sticker inside the driver’s door. If you’re unsure, you can always ask a qualified mechanic or bring your car to a tire shop for help.
Why does tire pressure matter?: effects on traction, fuel economy, and handling
Tire pressure is one of the most important aspects of car maintenance. Properly inflated tires have a positive effect on traction, fuel economy, and handling.
Underinflated tires can cause a number of problems. For one, they can lead to decreased fuel economy. This is because the rolling resistance of an underinflated tire is greater than that of a properly inflated tire. Additionally, underinflated tires can cause decreased traction, making it more difficult to drive in wet or icy conditions. Finally, underinflated tires can adversely affect the handling, making the car more difficult to control.
It is therefore important to check your tire pressure regularly and inflate them to the recommended PSI. Doing so will help ensure the safe and efficient operation of your vehicle.
Checking your PSI: how and when
Tire pressure is one of the most important things to check on your vehicle. Incorrect tire pressure can lead to decreased fuel efficiency, decreased traction, and even tire failure.
Most vehicles have a sticker on the inside of the driver’s door that lists the correct tire pressure for your vehicle. You can also find this information in your owner’s manual. Once you know the correct tire pressure, use a tire gauge to check your tires.
It’s best to check your tires when they are cold, so check them first thing in the morning or after they’ve been sitting for a few hours. Use the tire gauge to remove the valve cap and press it onto the valve stem. The gauge will give you a reading of the current PSI.
Here is a good video that shows the standard way, without digital help, so if you are stuck at an old gas station you can get the tires filled correctly
How to check and fill your car tires
Maintaining the correct PSI: add air when needed
It’s important to check your tire pressure regularly and add air when needed. The correct PSI for your tires can be found in your car’s owner’s manual or on a sticker inside the driver’s door. Underinflated tires can lead to poor handling and increased fuel consumption, while overinflated tires can cause premature tire wear.
Easy options to watch your Tire PSI: Smart Tire Pressure monitoring systems
If you’re looking for an easy way to keep an eye on your tire PSI, there are a few smart tire pressure monitoring systems that can do the job for you.
One option is the TPMS from TireMinder. This system comes with four wireless sensors that attach to your tires and send data to a display unit inside your vehicle. The display unit will then show you the current pressure of each tire, as well as the temperature and battery life of each sensor.
Another option is the FloPro+ from Flo Technologies. This system also uses wireless sensors to monitor your tire pressure, but instead of a display unit, it sends data to your smartphone or tablet via a Bluetooth connection. The FloPro+ app will then show you the current pressure and temperature of each tire, as well as other important information like air pressure trends and low-pressure alerts.
Conclusion: the importance of monitoring tires
If you’re a driver, it’s important to know about tire pressure and how to keep an eye on your tire PSI. Tire pressure is measured in pounds per square inch (PSI). The recommended PSI for most passenger cars is between 30 and 35. However, if you are running a different tire setup you might have different requirements depending on what you are trying to do.
By no means would a track car have the same as a car running crazy camber. And your grocery-getting minivan might not have the same PSI as your boosted Civic. But if there is anything that these rides share in common it is that they must have the right PSI to get their jobs done. It won’t matter which rims you have for PSI levels, but if you want to learn more about what forged rims are make sure you take a look at our article which goes over all the info you will ever need about them!